We recommend using our simple BEND, TWIST, POP & LOCK assembly method to save yourself stress and any potential fights with your partner/housemate/loved one!

1. BEND

Bend down and layout all the pieces on the floor to roughly where they are going to go (like a puzzle). Use the custom diagram we provide with your Evolvex piece to get you a clear idea of how the pieces work together.

2. TWIST

Now that you have everything nicely laid out, get your bag of pins and twist them into the brass inserts. We've pre-inserted the CAMS so you don't have to do this.

3. POP

Now comes the fun part – popping all the pieces together! Start from the base if it’s storage, or flip the top over to insert the supports in if it’s a table. The pins should all have corresponding holes so it’s just a matter of popping them all into place.

4. LOCK

Now everything has been inserted it’s time to lock it all in. Get your screw driver (not provided) and lock all the cams in by turning them in the arrow direction. Don’t over tighten because you might need to unlock it someday, but tighten enough so you don’t need to keep tightening…you’ll know when this is!

A few more tips....

TOP OVER SIDES

BACK SITS ON THE INSIDE

latest designs